Trueshopping SF20601 Manual De Instrucciones página 4

g. If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of dust collection can reduce dust related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The correct power
tool will do the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack from the power tool
before making adjustments, changing accessories or storing power tools. Such preventative
safety measure reduces the risk of starting the power tool accidentally.
d. Store idle power tools out of reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the
hands of untrained users.
5. Service
a. Have your power tools services by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
b. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified person in order to avoid a hazard.
LITHIUM ION BATTERY AND CHARGER SAFETY WARNINGS
WARNING!
Do not allow any liquid to get inside the charger. Electric shock may result. To facilitate cooling of
the battery pack after use, avoid placing the charger in a warm environment such as in a metal shed or
uninsulated trailer.
•
Before using the charger read all instructions and cautionary markings on the charger, battery pack and
the product using the battery pack.
DANGER!
If the battery pack case is cracked or damaged, do not insert it into charger. There is a danger of
electric shock or electrocution.
•
This charger is not intended for any uses other than charging rechargeable batteries. Any other use may
result in risk of fire, electric shock or electrocution.
•
Do not place any object on top of the charger or place the charger on a soft surface that may result in
excessive internal heat. Place the charger in a position away from any heat source.
•
To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when
disconnecting the charger.
•
Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to
damage or stress.
•
An extension cord should not be used unless absolutely necessary. Use of an improper extension cord
could result in the risk of fire, electric shock or electrocution
•
Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any
way. Have it checked by an electrician or power tool repairer.
•
Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair is
required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.
•
To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning,
Removing the battery pack will not reduce this risk.
•
Never attempt to connect 2 chargers together.
•
DO NOT store to use the tool and battery pack in locations where the temperature may exceed 40
as inside sheds or metal buildings in summer).
4
o
C (such