Weidmuller 2608C Manual De Instrucciones página 21


Read these operating instructions thoroughly and completely be-
fore operating your meter. Pay particular attention to WARNINGS
which will inform you of potentially dangerous procedures.
The instructions in these warnings must be followed.

Always inspect your meter, test leads and accessories for any
sign of damage or abnormality before every use. If any abnormal
conditions exist (eg-broken test leads, cracked cases, display not
reading, etc.), do not attempt to take any measurements.

Do not expose the instrument to direct sun light, extreme
temperature or moisture.

Never ground yourself when taking electrical measurements. Do
not touch exposed metal pipes, outlets, fixtures, etc., which might
be at ground potential. Keep your body isolated from ground by
using dry clothing, rubber shoes, rubber mats, or any approved
insulating material.

To avoid electric shock use CAUTION when working with
voltages above 40 Vdc or 20 Vac. Such voltages pose a shock
hazard.

Never exceed the maximum allowable input value of any
function when taking a measurement. Refer to the specifications
for maxi- mum inputs.

Never touch exposed wiring, connections or any live circuit when
attempting to take measurements.

Do not attempt to operate this instrument in an explosive
atmosphere (i.e. in the presence of flammable gases or fumes,
vapor or dust).

When testing for the presence of voltage, make sure the voltage
function is operating properly by reading a known voltage in that
function before assuming that a zero reading indicates a no-
voltage condition. Always test your meter before and after taking
measurements on a known live circuit.

Calibration and repair of any instrument should only be performed
by qualified and trained service technicians.

Do not attempt calibration or service unless trained and another
person capable of rendering first aid and resuscitation is present.

Remember: Think Safety, Act Safely.
2608C.p65
21
21
9427370000_00/06.2019
? 2 009/6/5, 下午 04:18