Operating Your Scooter - Mobiclinic Libra Manual De Instrucciones

Instruction Manual Libra
ES EN PT FR IT DE
FUNCTION OF PARTS
Top control panel
Speed Control Knob.
The Rabbit means fast and Turtle is slow. By turning this, you control the total speed transferred to the thumb con-
trols.
Self Diagnostic Warning Light
Flashing indicates problems with the scooter.
Battery Gauge:
This light is yellow. Below you will find three color ranges: red, yellow and green. When the light is on in all three
color ranges, the batteries are fully charged. When the light is on only in the red, or red and yellow areas, the ba-
tteries need to be recharged
Beneath top control panel
Throttle:
Pushing the right Throttle moves the scooter forward. Pushing the left Throttle moves the scooter backward. (This
can be reversed if required by local dealer.) Releasing both engages the automatic brake. This is also your accele-
rator. The further you depress them, the faster you go. (Subject to the position of the Rabbit/Turtle control).
At base of steering tiller
Seat Control Levers:
Seat Control Slide - Lift up on lever under front edge of seat to adjust forward and backward. Seat Rotation Lever
- Push lever back to rotate seat; push forward to lock seat in position.
Rear body
Rear Cover:
Protects batteries from damage.
Anti-tip wheels:
Helps keep the scooter from tipping over.
The Free-Wheeling Lever:
It will let you change the Mode of your scooter (Neutral Mode or Drive Mode). The Neutral Mode (N) will let you
move the scooter without energy, you will be able to push it, whereas the Drive Mode (D) will let you drive the scoo-
ter and immobilize it when you want to park it.
You will find some stickers next to the lever, they will help you to know the Mode of your scooter.
If you would like to change from Neutral Mode to Drive Mode, you must turn off the scooter. After changing the
Mode, you will be able to turn on again your scooter.

OPERATING YOUR SCOOTER

You can make the following adjustments to increase your comfort when driving:
-Remove rear shround and connect the battery wire.
· Adjust seat height and location
· Adjust steering column to comfortable position.
· Adjust legroom
1. Before operating your scooter, check the following:
-free-wheeling device on D -speed dial is at the turtle picture.
2. Sit on scooter and turn on key. The Battery Gauge light should be lit in the green, yellow, and red color zones.
The Self-Diagnostic Warning Light should not be blinking.