Charging The Batteries - Mobiclinic Libra Manual De Instrucciones

Instruction Manual Libra
ES EN PT FR IT DE
Unscrew controller wiring harnesses (C).
Remove rear shroud off of the scooter (D).
(D)
(C)
Remove battery fixing Velcro (E).
Unplug both battery harnesses (F) and remove batteries (G).
(E)
(G)
(F)
Detach the front and rear sections by holding the Seat Post (J) with one hand and the other hand pushing the
release lever to the rear of the scooter. Lift the seat post to separate the Rear Frame Assembly (H) from the Front
Frame Assembly.
(H) (J)

CHARGING THE BATTERIES

Batteries must be charged before using the scooter for the fi rst time and should be charged after each day use.
You will need scooter and the battery charger.
1. Insert battery charger cord into the charger connector on the charger output. Refer to above figure for correct
position
2. Plug the other end of the battery charger cable into a standard electrical outlet.
3. Turn the power on. Normally, The LED (Power) Light will turn on when electric current passes.
4. Charging starts. During charging, LED (Charge) will indicate orange light, when it turns to green light, that means
well-charged.