Electric Patient Lift FORTUNA
5.8.3. Foldable and portable frame
1.Low down the actuator and then fix the lifting arm completely (Fig. 1).
2.Remove the bolt before folding the frame (Fig. 2).
3.You should release the support plate before the frame stands up (Fig. 3).
6. BATTERY CHARGING
1. When the battery has only 1 bar left, controller box shall keep beeping 4 times and remind you to charge immediately. Actuator shall
not work without charging (battery level as shown in the picture below)
Battery level: 100%
Battery level: 75%
2. Battery Charging Procedure.
When battery beeps, switch off the emergency stop button and plug in the controller box. Once battery is fully charged, the state of
battery level shows 4 bars (100%) and LED on the control box no longer flashes
Notes:
1. Do switch off the emergency stop button and stop using the patient lift when charging.
2. Remove the control box and keep it in a shade once patient lift shall be not used for a long time. Charge the battery once every
month.
3. Do not charge the battery in a humid atmosphere.
4. In the event of that patient lift is not in daily use, it is strongly recommended that to switch off the emergency stop button so that to
cut off the currency and keep the battery level
Notice: Please remove the control box before folding the frame
PT
DE
IT
FR
Battery level: 50%
Battery level: 25%
EN
ES
15