Function; Scope Of Delivery; Optional Equipment And Accessories - Reflex Servitec Mini Manual De Instrucciones

4.3

Function

1 Vacuum is drawn
2 Injection
The Reflex Servitec Mini can degas the system water in a spray tube. Gas-rich water is sprayed into the spray tube via a nozzle. A pump sucks the water
out of the spray tube and transports it into the system. The system is set up so that the pump draws more water from the pipe that can flow through the
nozzle. The result is a vacuum in the spray tube, that causes the degassing effect. When the pump switches off, water flows into the spray tube and
pushes the driven out gas to the outside via a special valve.
4.4

Scope of delivery

The scope of delivery is described in the shipping document for the initial shipment and the content is shown on the packaging.
Immediately after receipt of the goods, please check the shipment for completeness and damage. Please notify us immediately of any transport damage.
Basic degassing equipment:
• Device
• 2 ball valves for the degassing connections
• Operating manual
• Drilling template and set of screws for wall mounting
4.5

Optional equipment and accessories

The following optional equipment and accessories are available for use with this device:
• Fillcontrol Plus Compact with external pressure sensor for make-up with water.
• Fillsoft/Fillsoft zero for softening/desalinating the make-up water from the public water network.
Note!
Separate operating manuals are supplied with accessories.
Note!
Connection to the heating or chilled water system must be performed externally.
3
4
Servitec Mini — 01.08.2017 - Rev. B
Description of the device
Discharge
Idling time
English — 9