Cata B-8 Plus Instrucciones De Uso página 10

Series PLUS
INSTALLATION:
This extractor fan must be installed at least 2,3 metres of the ground.
Begin the installation by making a circular opening of 80 mm. (B-8 PLUS), 100 mm. (B-10 PLUS), 120 mm. (B-12 PLUS),
150 mm. (B-15 PLUS) diameter in the wall, ceiling or wall where the extractor is to be installed.
Remove the front cover (A) by pressing the catch (1) with the tip of a screwdriver until it is freed and then pulling it forward.
Place the exhaust conduit (D) in the hole in the wall, ceiling or wall for exhaust of the air.
Fix the base of the housing (B) in place using the plugs and screws provided.
Note:
• This extractor is not designed to be used by people (including children) with physical, sensorial or mental capacity, or who
lack experience or knowledge about it, unless they have had supervision or instructions on how to use the hood by someone
who is responsible for their safety.
• Children must be supervised to ensure that they do not play with the extractor.
• The installation, electrical connections and adjustments must be performed according to the local rules by a qualified
person.
• Do not install the exhaust pipe (D) of the extractor unit to a chimney, ventilation pipe or hot air conduit.
Before connecting the unit to pipelines, consult the local municipal regulations regarding exhaust air and ask the permission
of the person in charge of the building.
• Make sure that the ventilation is appropriate, especially when the extractor is used in conjunction with an appliance with
a combustion chamber.
• This extractor is designed for the ventilation of homes or similars premises.
• Do not use in premises where the room temperature is above 40° C.
• This extractor does not cause any interference in radio/television sets (Standard 2004/108/CE).
GB
IPX4
ENGLISH