Descargar Imprimir esta página

Pioneer DV-868AVi Manual De Instrucciones página 91

Publicidad

Idiomas disponibles

Idiomas disponibles

Additional information
Problem
No audio, or audio is
distorted.
The analog audio is OK, but
there appears to be no
optical/coaxial digital audio
signal.
Noticeable difference in
DVD and CD volume.
Cannot play multi-channel
audio.
Remedy
• No audio is output during slow motion playback or when scanning
discs other than audio CDs.
• Some DVD discs do not output digital audio: Switch your amplifier
to the player's analog outputs.
• Check that the disc is free from dust and dirt, and that it is not
damaged (see Taking care of your player and discs on page 79).
• Check that all interconnects are firmly inserted.
• Check that the plugs and terminals are free of dirt, oxide, etc. and
clean if necessary. Also check the cable for damage.
• Make sure the player's output is not connected to the amplifier's
phono (turntable) inputs.
• Check your amplifier/receiver's settings (volume, input function,
speaker settings, etc.).
• DV-868AVi only–If the i.LINK interface is active, all other audio
outputs are switched off. See Audio Out
switch it off.
• Make sure that the Digital Out setting is set to On (see Digital Out
on page 60).
• Check that the Dolby Digital, DTS and MPEG Out settings (see
Digital Audio Out settings on page 60) are suitable for your amplifier/
receiver—check the instruction manual that came with your
amplifier/receiver.
• SACDs and some DVD-Audio discs do not output digital audio.
Listen through the player's analog audio outputs.
PURE AUDIO
• Check that the
PURE AUDIO
button (
• This is due to differences in the audio format and is not a
malfunction.
• Make sure that Audio Output Mode is set to 5.1 Channel (see
Audio Output Mode on page 73).
• Check that the Dolby Digital, DTS and MPEG Out settings (see
Digital Audio Out settings on page 60) are suitable for your amplifier/
receiver—check the instruction manual that came with your
amplifier/receiver.
• DVD-Audio and SACDs do not output multichannel digital audio.
Listen through the player's analog outputs.
• Check that the settings in the Speaker Installation on page 74 are
correct.
• Check the audio options available from the disc menu.
on page 76
indicator is not lit. If it is, press the
See also Front panel
on page 24).
09
for how to
91
En

Publicidad

Capítulos

loading

Este manual también es adecuado para:

Dv-668av