Publicidad
Idiomas disponibles
Idiomas disponibles
100W QUICK HEAT-UP SOLDERING GUN
Ideal for cutting, sealing and pokerwork. Built-in spotlight illuminates work. Ready to solder in
six seconds.
How to solder
1.
Clean dirt, rust or paint on the part to be soldered.
2.
Heat the part by the soldering iron.
3.
To be sure that the solder is cooled down before it is moved from the soldered
part.
4.
Melt
the
Note: If using non-resin-based solder, you should coat some solder paste against the part
before soldering.
Caution
1.
Maintain the heated soldering iron carefully, The high temperature iron will
cause fires or painful burn to the body.
2.
When you use the soldering iron for the first time, there will be some slightly
smoke coming out. It is normal and will last for about 10 minutes because the
heat element is being dried.
3.
This appliance is not intended for use by young children and infirm persons
unless they have been adequately supervised by a responsible person to ensure
that they can use the appliance safely。
4.
Young children should be supervised to ensure that they do not play with the
appliance.
5.
Never file the plated tip.
6.
This tool must be placed on its stand when not in use.
7.
Check whether the voltage, current comply with the regulation of technical
parameters when connecting the power.
8.
If the supply card is damaged, it must be replaced by the manufacture, its service
agent
or
During use, the on-off switch can not be pressed up to 12seconds, then keep the switch
unconnected more than 48seconds.
Specifications
Power supply: 220V 50Hz
Packaging: Clampshell
n°1 tip high efficiency, pre-tinned pure copper tip included
Replacement tip: code 495236123
resin-based
solder
similar
qualified
Power: 100W
by
touching
persons
in
order
it
against
the
to
avoid
a
part.
hazard.
Publicidad
