Connettori; Specifiche Tecniche; Connectors; Technical Data - PROEL PRL Serie Manual Del Usuario

CONNETTORI - SPECIFICHE TECNICHE
CONNECTORS - TECHNICAL DATA
CONECTORES - ESPECIFICACIONES TECNICAS

CONNETTORI

SPECIFICHE TECNICHE

Output power (THD<1% 1kHz)
Stereo 8+8Ω
Stereo 4+4Ω
Bridge Mono 16Ω
Bridge Mono 8Ω
Frequency response (± 0.5dB)
Input sensitivity:
Input impedance:
Damping factor:
S/N ratio: (unweighted)
Input connectors:
32.5mm

CONNECTORS

Italiano

TECHNICAL DATA

Italiano
PRL250
80W+80W
125W+125W
20Hz-20kHz
20kΩ balanced / 10kΩ unbalanced
>300 @ 4Ω
>100dB
1
Stereo Jack / " and RCA-pins
4
43.8 mm
English
RCA-pin unbalanced
positive / ground
JACK balanced
Tip-positive / Ring-negative / Sleeve-ground
JACK unbalanced
Tip-positive / Ring-negative connected
POWER CONNECTOR
1+ / 1- connected
2+ / 2- not connected
English
Output connectors:
Cooling:
Indicators (LED)
125W Protections:
250W
Power supply
0dB Mains fuse
Max power consumption
Dimensions: WxHxD
Weight:
Shipping:
Medidas de potencia realizadas en conformidad con las normas AES.
15

CONECTORES

to Sleeve-ground
ESPECIFICACIONES TECNICAS
SPK4MP (1+/1-) and Binding posts (Bridge)
Green/Red for Signal/Clip - Red for Protect
DC - Thermal - Soft Start - Short circuit
OSC™ Output Sense Clipping
230V AC - 50Hz or 117V AC - 60Hz
T2A 230V / T4A 117V
10.4kg / 0.037cbm
Misure di potenza effettuate secondo le norme AES.
Power measurements refer to AES standards.
PRL250
Español
Español
PRL250
convection
500VA
483x43.8x384mm
9.5kg - 21lbs