Compatibility; Anchorage Strength - Werner UPGEAR Manual De Instrucciones Para El Usuario

b. Compatibility.
Verify compatibility of all subsystems being used. Werner
products
products should be compatible, but
connection to other products should
be verified for compatibility to ensure
there is no possibility of accidental
detachment
rollout, non-standard closures, etc.
INAPPRoPRIATe CoNNeCTIoNS
A.
NO!
D.
NO!
c. Anchorage Strength
Verify that Chosen Anchorages are Appropriate.
1. For fall arrest, anchors need to have strength of either 5000 lbs.
per attached user (22.2kN), or be certified by a qualified person to
have strength of not less than 3600 lbs. per attached user (16kN).
2. For fall restraint (where there is no possibility of accidental
detachment), anchors need to withstand a static load of 3000
lbs per attached user (13.3kN), or be certified by a qualified
person to be able to withstand two times the foreseeable force.
3. For positioning systems, the anchorage strength must be a
minimum of 3000 lbs (13.3 kN), or be certified by a qualified
person to have strength of twice the foreseeable force.
Page 6
connected to Werner
from side-loading,
B.
NO!
NO!
PRoPeR CoNNeCTIoN
NO!
E.
NO!
C.
NO!
F.
NO!