iSkute Balance Board Manual De Usuario página 4

1. Locate the circular power button on the iSkute Balance Board. This button is next to the iSkute Balance Board charge
port. Press this button once to activate the iSkute Balance Board.
2. Ensure that light on centre console is GREEN.
3. Hover a foot over one of the two platforms with your other foot planted on the ground behind the board. In one motion,
apply pressure to hovered foot and proceed to bring your other foot from the ground onto the iSkute Balance Board.
Making sure to keep the sole of both feet level. Keep your stance wide (near outside edge) on the foot pad to ensure the
sensors under the pads are fully engaged.
4. TAKE A MOMENT TO OBTAIN YOUR BALANCE in a stationary position.
5. With the device in a stationary position if you apply pressure forward (on your toes) the board will move forward. If you
apply pressure backwards (on your heels) the board will move backwards.
6. Applying more pressure to one foot than the other will allow you to turn. Applying more pressure to your toes on your left
foot will turn the device clockwise (to the right). Applying more pressure to your toes on your right foot will turn the device
counter clockwise (to the left).
7. When getting off the board, users must take care and DO NOT JUMP OFF. Bring the iSkute to a stop, step one foot off
the back while keeping the board level. Once you have taken the first foot off the board you can then safely take your last
foot off.
iSkute Balance Board - Beginner Mode
2.2
The iSkute has a beginner mode. This limits the speed of the board to aid learning before you move up to the boards full speed.
1. With the iSkute turned on (green battery light lit), press the function button once and the iSkute will beep once to
announce you are in beginner mode.
2. To return to normal riding mode, power the iSkute off and then back on.
ENGLISH - 4 -