BOJ KT-1700 Manual De Uso página 4

English
3. Connect the plug into a power outlet. Turn on the switch by pressing it down, the indicator in it
will light up. Then start to boil the water, the kettle will switch off automatically once the water
has boiled. You can shut off the power by turning off the switch at any moment during boiling
water. If you want to boil water again, only turn on the switch directly to restart the kettle.
Note: Ensure that switch is free of obstructions and the lid is firmly closed, the kettle will not turn
off if the switch is constrained or if the lid is opening.
4. Lift the kettle from the power base and then pour the water.
Note: operate carefully when pouring the water from your kettle as boiling water may result in
scald, besides, don't open the lid while the water in the kettle is hot.
5. The kettle will not re-boil until the switch is pressed again. The kettle may be stored on the
power base when not in use.
Note: always disconnect the power supply when not use and store it in the bottom of base.
Boil-dry protect
Should you accidentally let the kettle operate without water, the boil-dry protection will
automatically switch off the power. If this occurs, allow the kettle to cool before filling with cold
water before re-boiling.
Cleaning and maintenance
Always disconnect the appliance from the power outlet and let it cool down before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow moisture to contact with
these parts.
2. Wipe the appearance of body with a damp cloth or cleaner, never use a poisonous cleaner.
3. Remember to clean the filter at intervals. For easier cleaning, detach the filter and then replace
it after cleaning.
Caution: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the kettle
to prevent the gloss loss.
4. When not use or storage, the power cord may be wound under the bottom of kettle.
Removal of mineral deposits
Your kettle should be periodically descaled as the mineral deposits in tap water may form scale
on the bottom of kettle so as to cause the operation less efficiency. You can use the commercially
available descaler and follow the instructions on the package of descaler. Alternatively, you may
follow below instructions using the white vinegar.
1. Fill the kettle with 3 cups of white vinegar, then adding water to the amount so as to cover the
bottom of kettle completely. Leave the solution in the kettle overnight.
2. Then discard the mixture in the kettle, then filling the kettle with clean water, boiling and then
discard the water. Repeat several times until the odor of vinegar has been flushes away. Any
stains remaining inside the spout can be removed by rubbing with a damp cloth.
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local regulations: hand in the
non-working electrical equipments to an appropriate waste disposal center.
- 4 - - 4 -