Operational Specification List - Gram Precision DHS Serie Manual De Utilización

OPERATIONAL SPECIFICATION LIST

Spec. number
00
01
02
03
04
05
06
07
BIT 2
Decimal point position
000 – None
001 – 2nd digit (0.0)
010 – 3rd digit (0.00)
011 – 4th digit (0.000)
100 – 5th digit (0.0000)
101 ~ 111 – Not used
Minimum display
00 - 1
01 - 2
10 - 5
11 - 10
Selection of resolution
00 - 1/2000
01 - 1/3000
10 - 1/6000
11 - 1/7500
Decimal point figure
for numeral
0 - Period (.)
1 - Comma (,)
Start range
00 - ±10% F.S. 10 - ±3% F.S.
01 - ±5% F.S. 11 - ±2% F.S.
Manual tare cancellation
0 – Allow
1 – Inhibit
Auto-tare clear when
re-zero
0 – Allow
1 – Inhibit
Zero-tracking when Tare
0 - Allow
1 – Inhibit
BIT 1
Negative weight display
mask
0 – Minus grosso> 9e
1 – Minus gross Weight
Tare substraction
0 – Allow
1 – Inhibit
Weight reset when tare
0 – Allow
1 – Inhibit
Re-zero function
0 – Allow
1 – Inhibit
BIT 0
Net / Gross
Multi-interval
0 – Gross
1 - Net
Weight single interval or
multi-interval
0 – Single interval
1 - Multi-interval
IR mode protected by
SPAN SW
0 - NO
1 – YES
Re-zero range
0 - ±2% F.S.
1 - ±3% F.S.
Tare accumulation
0 – Allow
1 – Inhibit
Auto Tare clear
(≧Gross 21e & ≧Net 5e)
0 – Allow
1 – Inhibit
Not Used
11