CAUTION:
Do not insert the device into water for cleaning.
• Please follow the instructions as stipulated in the chapter "Cleaning".
First Use of the Machine
•
Take out all the parts carefully out of the packing. Save the
packing and the inner packing material for the whole dura-
tion of the warranty.
•
Clean the device before using it for the first time as de-
scribed in "Cleaning".
Mains Lead
Unwind the required mains lead from the base.
Operation
1. Place the machine on a flat surface.
2. Fill the cooking bowl with the amount of water signaled on
the measuring beaker for the number of eggs to be boiled.
NOTE:
As the degree of cooking depends on several factors, it
is advisable in the case of large (egg sizes L and XL) or
cold eggs to use slightly more water. If the eggs are too
hard, please pour slightly less water than stated in the
cooking bowl, or slightly more if the eggs are too soft.
3. The markings on the beaker have the following meaning:
soft
for soft-boiled eggs
weich
The individual lines above the words show
mollet
the number of eggs (1-7).
medium
between hard and soft-boiled.
mittel
The individual lines above the words show
medium
the number of eggs (1-7).
hard
for hard-boiled eggs.
hart
The individual lines above the words show
dur
the number of eggs (1-7).
4. Insert the egg tray.
5. Pierce the eggs on the bottom to avoid that they crack.
Please use the pricker on the underside of the measuring
beaker. Press the egg delicately against the piercing needle
until the egg is pierced.
6. Distribute the eggs evenly and one opposite the other in
the egg tray.
7. Cover it with the lid.
8. Insert the plug in a duly installed 230 V/50 Hz socket.
9. Turn the device on using the on/off switch. The control
lamp now illuminates.
10. The eggs are ready when the buzzer sounds. Switch the
device off and remove the mains plug from the socket.
11. Please hold the lid by the handle and put it to one side.
Caution! Hot.
32
12. Take the egg tray out of the cooking bowl and run the eggs
briefly under cold water so that they do not continue cook-
ing.
13. Leave the device to cool before putting it away!
Mains Cable Take-up Device
The mains cable can be wound up on the base.
Cleaning
WARNING:
•
Always remove the plug from the mains supply before
cleaning the machine.
•
Never insert the device into water for cleaning.
•
The exterior of the machine should be cleaned, if neces-
sary, with a slightly damp cloth without additives.
•
Wash the lid and the egg tray in a normal sink.
•
Allow the unit to cool down before you put it away.
Decalcification
•
The decalcification intervals depend on the hardness of the
water and the frequency of use.
•
If the machine switches off before the water boils, it prob-
ably needs to be decalcified.
•
Do not use vinegar, but a normal citric acid-based decalci-
fier. Follow the manufacturers' instructions.
Technical Data
Model: ......................................................................EK 515 CB N
Power supply: ........................................................ 230 V~, 50 Hz
Power consumption: ........................................................... 380 W
Protection class: ........................................................................... I
Net weight: .........................................................................0.65 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations