Sleep Operation - Tokai TCP-124 Manual De Instrucciones

Use the Tune - (8) or Tune + (12) button to select the desired
radio station. If you press and hold the Tune – (8) or Tune + (12)
button for one second, then release, the unit will automatically scan
to the next broadcasting station.
Press the ON/OFF button (11) to turn the radio OFF.
To preset radio station
Press the ON/OFF button (11) to turn the unit ON.
Use the Tune - (8) or Tune + (12) button to select the desired
radio station.
Press the MEM.SET/M+ (4) button; "P02" will blink in the display.
Press the MEM.SET/M+ (4) button again to set the preset.
Repeat steps 2 through 4 to set more presets.
The unit can preset 10 stations totally for FM.
When "P01-P10" blinks, press Tune – (8) or Tune + (12) button
to select the preset number.
To recall the radio preset
To recall a preset station, press MEM.SET/M+/NAP (4) button to
select the desired preset number.

SLEEP OPERATION

When you listen to the radio, press the SNOOZE/SLEEP/DIMMER
(6) button to enter into the sleep mode. You can adjust the sleep
timer from 90 minutes to (60, 30 to 15 minutes) to OFF, by pressing
repeatedly the SNOOZE/SLEEP/DIMMER button (6). When sleep
timer is selected, the unit will automatically turn off once time is up.
NAP FUNCTION (count down timer)
In radio off mode, press MEM.SET/M+/NAP (4) button to enter
into the NAP mode, the NAP time 90 will be displayed during 5
seconds. In the meantime, press repeatedly MEM.SET/M+/NAP (4)
button to set the duration time from 90 min to 10 min.
Once time is up, the alarm buzzer will sound for 30 min and then shut
off automatically. To stop the alarm buzzer, press the ON/OFF button
(11).
Press the MEM.SET/M+/NAP (4) button has no effect during alarm
operation.
18