IMPORTANT
There is a sensor located on top of the unit that picks up any movement or
objects near the top or back of the unit. Please be sure to place the radio on a
surface with a no obstructions 9-12 inches above or 3-6 inches behind the unit.
This will help maximize the area for recognizing the motion of your hand and
also reduce the chances of the unit false triggering. If the unit begins beeping
and the display functions erratically, it may be either too close to an object above
or behind the unit. If this happens, please make sure there are 9-12 inches of
clearance above and 3-6 inches behind the unit to avoid the false triggering.
INFRARED SENSOR FUNCTION
1. In radio off mode, to display indoor temperature and alarm time settings:
Wave your hand over the IR SENSOR (4) once to to show the indoor
temperature .
Wave your hand over the IR SENSOR (4) again within 1 second to show the
ALARM 1 time.
Wave your hand over the IR SENSOR (4) again within 1 second to show the
ALARM 2 time.
INFRARED SENSOR FUNCTIONS
25