Settings - VOSS.farming impuls duo DV 40 Instrucciones De Uso

DE EN FR IT NL SV ES
If you want to unassign an identification number in the remote control, start the calibration
process, but without the energiser.
If the remote control does not find the energiser, it deletes this position. To exit the
calibration mode, briefly press the power button on the remote control (15). A remote
control can manage up to six different energisers. Conversely, an energiser can connect to
and be controlled by three different remote controls.

12. SETTINGS

To enter settings press continuously the setting button (14) on the remote control. There
are now three options available which you can cycle by pressing the settings button. Use
the arrow keys to make changes to the settings.
Letter „A" - you can switch the alarm signal of your remote control on or off.
39
41405 | 12 | 2020 | V2