Initial Setup - Rexel Auto+ 500X Manual De Instrucciones

Illuminated Icons Explained
Colour of symbol
Power ON/OFF switch OFF
Sleep mode
Power ON/OFF switch ON
Stand by
Auto mode
Continuous jam boost mode
Reverse mode
Paper loading door open
Bin full/bin open
Paper jam
Too many sheets are being fed into manual feed slot
Cutters are self-cleaning
Entering PIN password
Paper loading door is locked
Incorrect PIN password has been entered
Correct PIN password re-entered
Auto-feed Technology
The Auto+ 500X has been designed to automatically shred up
to 500 sheets from the auto-feed chamber and up to 10 sheets
through the manual feed slot. The auto-feed mechanism has
been designed to handle paper fastened with staples and paper
clips and to only pull a few sheets of paper into the cutting
mechanism to minimise the risk of paper jams.

Initial Setup

The shredder is designed to automatically lubricate the cutting
mechanism as required to ensure the product continues to
work to its maximum performance and to extend the product
life. Please follow the operation instruction before turning
on the shredder for the first time. The 30ml bottle of oil is
sufficient to allow the shredder to start for the first time and
to operate continuously for about one hours shredding before
the reservoir will need refilling. When the 'Oil Refill' indicator
is illuminated ( ), flip up the oil reservoir cap (V) and refill
the oil reservoir using a bottle of standard Rexel oil (1760049).
The automatic oiling operation (
seconds and you will hear the distribution pump during this
time. Auto-oiling operates after 15 minutes of shredding time.
Bin or Loading Door Open Safety
Function
As a safety precaution, if the bin or loading door is opened
during shredding, the shredder will stop and icon will light.
6
Lock Bin Full/
Door Open
Green Red Red
light
light
flash
light
flash x3
flash x3
) last approximately two
Oiling in Oil Paper
Operation Level Jam
Indicator
Green Red Red
light
light
flash
Jam Free Technology in manual
feed slot
Sensors in the paper feed area measure the thickness of
paper about to be shredded. The ability to shred or not is
communicated through red and green lighting. Green means
that the stack of paper is within the shredders sheet capacity
and OK to shred. Red means that you have too much paper,
remove some sheets in order to shred.
Given that you are unable to shred more sheets of paper
than the shredder is capable of shredding, paper jams are
prevented.
This prevents wasting time reversing paper and unblocking
jams not to mention the mess it can create.
Rare Occasions of Jamming
In the unlikely event of the shredder jamming, the Auto+ 500X
will stop shredding. Check that the bin is not full then try
clearing the jam using the reverse (
boost ( ) buttons then return to Auto mode (
unsuccessful follow the reverse function instructions.
Auto Jam
Free
Blue Green Red
light light
light light
light light
light light
light light
light light
light flash
light light
) and continuous jam
). If this is