General Information - Comunello WL Manual De Instrucciones

1. GENERAL INFORMATION

Please read carefully and follow the instructions detailed in this manual. Keep the manual for use and future
maintenance.
2. TABLE OF TECHNICAL DATA AND MARK
The CE mark certifies that the anemometer conforms to the essential health and safety requirements laid
down by European product directives. The CE mark can be identified by the relevant adhesive label applied to
the outside of the product, on which are shown some of the data shown in the following table:
Contact anemometer:
Sensitivity anemometer (pulse):
Sun sensor power supply:
Contact sun sensor:
Sun sensor sensitivity (range)
Connection cable length:
Operating temperature:
Packaging dimensions:
Container:
ANEMOMETER WITH SUN AND TEMPERATURE SENSOR
The WL sensor detects the sun, wind and temperature parameters and transmits them by cable to the
connected controller.
CAUTION: If the system is left unattended for long periods, we recommended that the sunshade be closed and
that the sun sensor's automatic function be deactivated.
WL
200 mA 100 Vdc
Every turn
12 - 24 Vac-Vdc
1 A 30 Vdc
5 - 40 Klux
(AWG 12-26) 4 m Máx.
-10 / +60 °C
240x185x110 mm.
PC UL94V-0 (IP54)
2