Síntomas Y Soluciones; Alimentación - Samsung SC-HMX10 Manual Del Usuario

Tabla de contenido

Publicidad

troubleshooting
✪ If these instructions do not solve your problem, contact your nearest
Samsung authorized service center.
Symptoms and solutions
Power
Symptom
Explanation/Solution
The battery pack may not be installed on your HD
The HD
camcorder. Insert a battery pack to the HD camcorder.
camcorder
The inserted battery pack may be discharged. Charge
does not turn
the battery pack or replace it with a charged one.
on.
If you use AC power adaptor, make sure it is properly
connected to wall outlet.
Is "Auto Power Off" set to "5 min"? If no button is
pressed for about 5 minutes, the HD camcorder is
The power
automatically turned off ("Auto Power Off"). To disable
this option, change the setting of "Auto Power Off" to
turns off
automatically.
"Off." page 69
The battery pack is almost exhausted. Charge the
battery pack or replace it with a charged one.
Remove the battery pack or unplug AC power adaptor,
and connect the power supply to the camcorder again
Power cannot
before turning it on.
be turned off.
Press the RESET button, and connect the power supply
to the camcorder again before turning it on. page 17
The temperature is too low.
The battery
The battery pack is not fully charged. Charge the battery
pack is
pack again.
quickly
The battery pack reached its lifespan and cannot be
discharged.
recharged. Use another battery pack.
100_ English
solución de problemas
✪ Si las siguientes instrucciones no le permiten solucionar el problema,
póngase en contacto con el centro de servicio autorizado de Samsung
más cercano.
Síntomas y soluciones
Alimentación
Síntoma
Explicación/Solución
Es posible que no se haya instalado la batería
en la videocámara HD. Inserte la batería en la
videocámara HD.
La videocámara
Es posible que la batería insertada esté
HD no se
descargada. Cargue la batería o sustitúyala por
enciende.
una cargada.
Si utiliza un adaptador de alimentación de CA,
asegúrese de que esté correctamente conectado a
una toma de corriente.
¿Se ha definido "Auto Power Off" en "5
min"? Si no se presiona ningún botón durante
unos 5 minutos, la videocámara HD se apaga
Se apaga
automáticamente ("Auto Power Off"). Para
automáticamente.
desactivar esta opción, cambie el ajuste de "Auto
Power Off" a "Off página 69
La batería está casi agotada. Cargue la batería o
sustitúyala por una cargada.
Quite la batería o desenchufe el adaptador de
alimentación de CA y vuelva a conectar una
fuente de alimentación a la videocámara antes de
No es posible
encenderla de nuevo.
apagar la unidad.
Presione el botón RESET y conecte la fuente de
alimentación de nuevo a la videocámara antes de
encenderla. página 17
Las temperatura es demasiado baja.
La batería se
La batería no está completamente cargada.
descarga con
Cargue de nuevo la batería.
mucha rapidez.
La batería ha llegado al final de su vida útil y no
puede recargarse. Utilice otra batería.
Español _100

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sc-hmx10aSc-hmx10cSc-hmx10nSc-hmx10cnSc-hmx10ed

Tabla de contenido