Adjusting The Clock - PiC indolor CSI 610 Manual De Instrucciones

1. The appliance has two memory archives. Each
memory archive can contain up to 50 measure-
ments.
2. Press the memory selection button to display the
desired data archive. Press the MEMORY button to
display the values with the relative sequence num-
bers.
3. The first value displayed is an average of the last
three measurements taken. Each subsequent press
of the MEMORY button will display the measure-
ments stored in the memory, starting with the most
recent one.
Deleting values from the memory
1. Press the memory selection button
to access one of the two archives.
2. Press the MEMORY button for
about 5 seconds to delete all the
information stored in the archive.
Press the MEMORY button for 5 seconds to eliminate
all the data in the memory
Please note: The data contained in both archives
may be lost if any of the batteries are removed. An
optional program is available that enables the data
memorised by the appliance to be uploaded onto a
PC.
Press the " " button
Month flashes
Increase value
Confirm value

Adjusting the clock

1. To adjust the date and time displayed by the
appliance, press the " " button. A flashing
number indicating the month will appear on
the display.
2. Adjust the month by pressing the " " but-
ton. Each time the button is pressed the
value will increase by one unit. Press the
" " button to confirm the selected value.
The screen will show a flashing number
indicating the day.
3. Adjust the date, hours and minutes as
described in step 2, using the 2 " " button
to adjust the values and the " " button to
confirm them.
4. The number "0" will appear when the sphyg-
momanometer is ready to start measuring.
16