Lighting Instructions; Gas Conversion - BORETTI Michelangelo Manual De Uso

Burner lighting
1. Always open the lid when lighting the burn-
ers.
2. Turn the knob of the burner to hi. Press and
hold igniter button until the burner lights.
Depress The Ignitor Button
until the Burner Lights.
Manual burner lighting
See your local dealer for service if your grill ig-
niter is not functioning.
1. Remove the cooking grates and the flame
tamers that are over each burner.
Rear burner lighting
1. To light the rear burner, depress the igni-
tion button and then turn the rear burner
control knob to hi.
operating the rear burner
When operating the rear burner please ensure
that the warming rack is removed. The warm-
ing rack will become damaged if not removed
while the rear infrared burner is in use.
3. If the burner does not immediately light,
turn the valve to off. Wait 5 minutes then
repeat lighting procedures.
Turn the Control Knob to HI.
2. Turn the burner you are lighting to high /
light and place a long match near the side
gas ports of the burner.
3. If the burner does not immediately light,
turn the valve to off. Wait 5 minutes then
repeat lighting procedures.
2. If the burner does not immediately light,
turn control knob to off. Wait 5 minutes
then repeat lighting procedures.
The rear burner is specially designed to be
used with the rotisserie kit, and should only be
used when using the rotisserie kit.
NL
FR
ES
EN
67