EHEIM MODUL4000 Manual De Instrucciones página 19

English
‧ Ensure that the filter housing's suction openings are facing upward.
‧ When a filter has been expanded, take into account its additional weight and the changed weight
distribution – hold the filter at the handle as well as the longest side (⌦L).
Switching on the pump
Caution! Material damage.
▶ The pump must never run dry.
1. Pull the telescopic pipe ① out to the required length (⌦G).
2. Align the telescopic pipe vertically with the ball joint ③.
3. BUBBLE water feature nozzle: Turn the insert ② out of the nozzle until the water feature has the
required shape.
4. Insert the mains plug in the mains socket. Attention: The pump starts immediately!
Adjusting the water distribution
1. Regulate the amount of water for the water feature (⌦F) with rotary tap 1 ①.
2. Regulate the amount of water for the hose connection with rotary tap 2 ②.
Switching off the pump
1. Remove the mains plug from the mains socket.
6. Maintenance
Attention! Electric shock!
▶ Before all maintenance work, remove the mains plug.
Caution! Material damage.
▶ Do not use hard objects or aggressive cleaning agents for cleaning.
▶ The appliance components are not dishwasher-proof!
The following sections describe maintenance work necessary for optimum and fault-free operation.
Regular maintenance prolongs the service life and assures functionality of the appliance over a long
period.
Cleaning the water feature nozzle and telescopic pipe
1. Unscrew the telescopic pipe.
2. Remove the water feature nozzle.
3. Clean the telescopic section and water feature nozzle under running water.
Cleaning the filter
1. Close the filter housing's suction openings (⌦K).
2. Remove the filter from the water (⌦L).
3. Remove the outlet spigot with the hose.
4. Press on the locks (⌦H1) of the filter housing and separate it(⌦H2).
5. Remove the filter cartridges from the filter housings (⌦I).
6. Place the filter cartridges under running lukewarm water.
19