Brother P-touch 9500PC Manual De Instrucciones página 274

Select "Yes, I want to restart my
d
computer now.", and then click [Finish].
→Installation of the printer driver is
complete, and the personal
computer will restart.
Note
●
When the USB interface cable is
connected to the PT-9500PC, the serial
port cannot be used for communication.
Remove the USB interface cable from the
PT-9500PC.
●
When using a personal computer that
does not support a serial port baud rate of
115,200 bps, change the PT-9500PC
baud rate to 9,600 bps. For details, refer
to "Changing the baud rate" (→ P.101).
■ Using as a network printer
This section contains the procedures to install
the printer driver when using the PS-9000
print server (sold separately) designed
exclusively for the P-touch series printers.
When using the PS-9000 print server, the
PT-9500PC can be used as a network printer.
This function can only be used in a Windows
environment.
Ethernet cable
USB cable
Note
●
For PS-9000 setup, refer to the instruction
manual for the PS-9000 print server.
PS-9000
Ethernet
HUB
39