Using Multiple Computers; Changing The Baud Rate - Brother P-touch 9500PC Manual De Instrucciones

Using multiple computers

Although the recommended method of printing
from multiple computers to the PT-9500PC is
with the optional PS-9000 Ethernet Print Server,
an alternative method is described below.
The PT-9500PC can be used by multiple
personal computers as a shared printer.
Connect the PT-9500PC to one personal
computer and set it up for common use. The
PT-9500PC can then be used as a network
printer by personal computers in the same
network.
This function can only be used in a Windows
environment.
Ethernet cable
USB cable or serial cable
Note
●
The common-use settings for the printer
vary according to the operating system
running on the personal computer and
the LAN environment.
For details, refer to the instruction manual
for the personal computer.

Changing the baud rate

The serial interface baud rate is set to 115,200
bps at the factory.
When using a personal computer that does not
support a serial port baud rate of 115,200 bps,
change the PT-9500PC baud rate to 9,600 bps.
Note
●
After changing the PT-9500PC's baud
rate to 9,600 bps, change the personal
computer baud rate as well. For details,
refer to "Setting the personal computer
and PT-9500PC baud rate" (→ P.41).
Turn off the PT-9500PC.
1
With the PT-9500PC power off, press the
2
power button on the PT-9500PC for 5
seconds or more.
Ethernet
HUB
After the lamps flash alternately, release
3
the power button.
→The ERROR lamp (red) and power
button lamp (green) will flash
alternately.
→The baud rate is now set to 9,600
bps.
Power button
101