Vacuum Cleaner Description; Vacuum Cleaner Parts And Labels; Optional Kits; Accessories - Nilfisk cfm VHT437EXP Manual De Instrucciones

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

VHT437EXP - VHT456EXP

Vacuum Cleaner Parts and Labels

Data plate which includes:

•

Manufacturer's name and address

•

Technical specifications

•

Serial number

•

Year of manufacture

•

Weight (kg)

Panel power plate

Indicates that the panel is powered by the voltage

indicated on the data plate.

Attention plate

Draws the operator's attention to the fact that the main

filter must only be shaken when the vacuum cleaner

is turned OFF. Failing this, the shaking would have no

effect while the filter itself could be damaged (see also

"Shaking the primary filter" paragraph).

Inlet

Outlet / exhaust

Check valve (Clapet)

Regenerative blower

Manual motor starter

Connection vacuum hose

10. Band latch

11. Container release handle

This vacuum cleaner creates a strong air flow which is drawn

in through the inlet (4) and blows out through the outlet (5).

Before turning the vacuum cleaner on, fit the vacuum hose

into the inlet and then fit the required tool on the end of the

hose. After the hose and tools have been fitted, make sure

that the motor turns correctly.

This vacuum cleaner is supplied with a unidirectional

clapet valve which prevents the vacuum from blowing air

and materials out of the dust container if the wrong phase

sequence is found. If the case, the vacuum cleaner does not

suck any air.

The vacuum cleaner is equipped with a main filter which

enables it to be used for the majority of applications.

Besides the main filter which retains the more common

types of dust, the vacuum cleaner can be fitted with an

upstream absolute (HEPA) filter and a downstream absolute

(ULPA) filter, with a higher filtering capacity for fine dust and

substances harmful to health.

C404