Replacing Fuse; General Maintenance - SFaudio SFF2 Manual De Usuario

QUICK TROUBLE SHOOTING
If the unit is not functioning properly:
1. Check if main power is on.
2. Check the fuse hasn't blown.
3. Check the unit isn't in DMX mode.
4. Check there is fluid in the tank and the pipe is pushed down to the bottom of the
bottle.
5. If there is blockage use distilled water or haze machine cleaning fluid.

REPLACING FUSE

Disconnect from the main power supply first, then remove the fuse holder above the
IEC Socket to reveal the fuse. Replace the correct fuse rating as stated on lighting or
user guide.Then, lock the fuse holder cover back into place.

GENERAL MAINTENANCE

To maintain optimum performance and minimize wear, the item should be cleaned
frequently.Usage and environment are contributing factors in determining frequency.
As a general rule, fixtures should be cleaned after use to avoid dust build-up and
blockages, which can result in poor performances, overheating and breakages. Be sure
to power off fixture before conducting maintenance.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove
dust collected on external vents and internal components. Clean the external case
when the fixture is cold with a dry cloth or tissue, and drag dirt and grime to the outside
case.
11