Technical Specification - SFaudio SFF2 Manual De Usuario

4. Timer LED indicator (Illuminated Yellow when timer active).
5. Manual ready indicator (Illuminates Green when ready).
6. Power indicator (Illuminates red when power is on).
7. Adjust the amount of Haze released ( between 0 – 100% ) .
NOTE: The below controls are only used when in timer mode
8. Adjust the interval gap between each release of Haze ( between 0 – 30 Min approximately) .
9. Adjust the duration the Haze / Haze is released at each interval ( between 0 – 15 seconds
approximately)
For best results select "continuous" and adjust output to achieve desired effect, note it can
take around 30 seconds for the machine to produce the correct output.
For more new products, please kindly contact SFAUDIO.
Work with SFAUDIO, more solid, more reliable products are always waiting for you!

TECHNICAL SPECIFICATION:

Voltage :
Power:
Fuse:
Pre-heating time:
Fluid consumption:
Haze output:
Tank:
Micro computer control:
Timer controller:
DMX CH
Fluid-less protection:
Digital display:
Gross weight
MEAS:
200min/L(30%) , 120min/L(100%)
14
AC220~240V/50Hz
700W
250V/5A
2 Mins
3500Cu ft/min
1.2 L
YES
YES
2
YES
YES
7.6kg
39x26x35CM