Repair, Change Of Length; Rolliner Ng Connecting The To Wire Systems And Wire Feeding Units - Binzel Rolliner NG Manual De Instrucciones

6 Repair, change of length

6 Repair, change of length

7 Rolliner NG Connecting the to wire systems and wire feeding units

7.1 Rolliner NG Connecting the to decoiling hoods, Fig. 6
7.2 Rolliner NG Connecting the to wire feeding units, Fig. 7
EN - 4
Due to the structure of the
added at any time.
1 Open the closing clip using a flat screwdriver or close it by pressing it
together.
Replace the damaged elements.
The Rolliner NG can be connected to wire drums, bulk wire systems, wire
feeding units or welding torches using screw connections or quick connections.
The Rolliner NG can be connected to the decoiling hood in combination with
the decoiling hood connection AER 200 and the threaded coupling RNG 20
or the quick coupling CRNG 20.
The Rolliner NG can be connected to the decoiling hood using the wire feed
Rolliner and the threaded coupling RNG 20 or the quick coupling CRNG 20.
NOTE
• The threaded couplings and quick couplings are equipped with plastic
inserts. They protect the wire against damages. Always insert them in
transport direction of the wire (see Fig. 8).
(Combination) liner with retaining nipple
Rolliner NG, individual elements can be removed or