Battery Replacement; Technical Specification - Velleman WTPC108 Manual Del Usuario

• Press the on/off switch [D] to switch the LED backlight on. Slide the lens
[C] in or out of the projector until the dial appears sharp. Note that the
minimum distance is 1m.
• To adjust the time, turn the time set rotary knob [H] until the indicated
time is correct.
• Close the back cover [G] by placing it on the back of the device and sliding
upward until the back cover release button [F] snaps into place.
7.

Battery replacement

• Switch the LED backlight off [D] and unplug the adaptor from the mains.
• Open the back cover [G] by pressing on the back cover release button
[F] while pushing the back cover [G] downward.
• Insert a new 1.5V AA battery (LR6C, not incl.) into the battery
compartment following the polarity markings as indicated inside the
compartment.
• Close the back cover [G] by placing it on the back of the device and
sliding upward until the back cover release button [F] snaps into place.
WARNING
Dispose of batteries in accordance with local regulations.
Do not throw in batteries fire as they may explode. Keep
batteries away from children.
8.

Technical Specification

colour
power supply
clock
projection light
weight
dimensions
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulted from
(incorrect) use of this device.
For more info concerning this product, please visit our website
www.velleman.eu.
The information in this manual is subject to change without prior
notice.
00 (17/11/2008)
WTPC108
black
1x 1.5V AA battery LR6C (not incl.)
AC adaptor 230Vac/5Vdc-1A (incl.)
576g
220 x 150 x 130mm (base incl.)
5
®
Velleman