Safe Use Instructions – ROC800-Series
Terminal Blocks
+ and –
AUX+ and AUX–
AUX
+ and AUX
–
SW
SW
Table 3. 30 V DC Power Input Terminal Block Connections
Accepts 30 volts dc nominal from an AC/DC converter or
other 30 volts dc supply.
Supplies reverse polarity protected source voltage (voltage
output follows input) to external devices.
Supplies switched power for external devices.
A
C
A
LED indicators on Power Input module
B
Wire channel covers
C
RESET button
Figure 8. ROC809 Remote Operations Controller
Figure 9. ROC827 with Installed Foundation Fieldbus Interface
Description
Part D301201X012
Volts DC
11 to 30 volts dc
BAT+ minus 0.7 volts
dc
BAT+ minus 0.7 volts
dc
B
Page 6