Electrical Safety; Personal Safety; Power Tool Use And Care - Workzone 44217 Manual Del Usuario

12V Cordless Drill
6) Avoid body contact with earthed or grounded surface, such as pipes,
radiators, ranges and refrigerators. These are an increased risk of electric
shock if your body is earthed or grounded.
7) Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
8) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cord increase the risk of electric
shock.
9) When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk
of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual
current device(RCD) protected supply. Use of an RCD reduce the risk of
electric shock

Personal safety

1) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the in uence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal
injury.
2) Use safety equipment. Always wear eye protection. Safety equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
3) Avoid accidental starting, Ensure the switch is in the off-position before
plugging in. Carrying power tools with your nger on the switch or
plugging in power tools that have the switch on invites accidents.
4) Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
5) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
6) Dress properly. Do not wear loose clothing or jewelery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
7) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. Use
of these devices can reduce dust-related hazards.
5
acs@americancustomerservice.com
USA

Electrical Safety

AFTER SALES SUPPORT
1800 505 8311
USA