Canon EOS REBEL T6S Manual De Instrucciones página 139

Select the AF point.J
2
Pressing <0> or the <L> button will

toggle between automatic selection
and zone selection. In Basic Zone
modes, automatic selection is set
automatically.
Use the <W> <X> or <Y> <Z> keys

to select a zone. To return to the
center zone, press <0> or the <L>
button again.
You can also tap on the LCD monitor

screen to select a zone. When a zone
is selected, tap [n] on the screen
to switch to automatic selection.
Focus on the subject.
3
Aim the AF point over the subject and

press the shutter button halfway.
 When focus is achieved, the AF point
will turn green and the beeper will
sound.

If focus is not achieved, the area
frame will turn orange.
Take the picture.
4
Check the focus and exposure, then

press the shutter button completely to
take the picture (p.132).
Using AF to Focus (AF Method)
139