Using Camera Access Point Mode To Establish A Connection - Canon EOS REBEL T6S Manual De Instrucciones

Using Camera Access Point Mode to Establish a Connection

Smartphones that are not NFC-enabled can be connected in camera
access point mode.
To establish connection, operations on the smartphone are required.
For details, refer to the smartphone's instruction manual.
Operation on the Camera-1
Select [Wi-Fi function].
1
Under the [51] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function].
Select [q].
2
Select [q] (Connect to smartphone)

and press <0>.
Select [Camera access point
3
mode].
Press the <W> <X> keys to select

[Camera access point mode], then
press <0>.
Select [OK] and press <0> to go to

the next screen.
W-23