Parts List - KIKKA BOO VICENZA Instrucciones De Uso

WARNINGS :
• Always lock the brake when put or carry a child
• Leaving the baby without care may cause a danger
• Use the braces when the baby begins to sit at his own.
• Do not use an additional mattress in the product.
• Before use be sure that the assembling mechanisms are blocked
• Always use the crotch belt together with the help belt.
• Every load handing on the handle a ects its stability.
• This product is not designated to go roller blades or to run.
• This stroller is indented to bear only one baby.
• This stroller is designated for the babies up to 0-48 months and weight 22kg and complies on EN1888-1&2:2018.
• Do not leave the stroller with a baby on the slope, even if the brake is locked.
• Do not use the stroller, if any component is damaged.
• During the assembling and disassembling the stroller, be sure that the baby is at the safe distance
• Making any adjustments, make sure that the movable parts are not close to the baby' s body.
• Always lock the brake when stops.
• Maximum load of basket is 3 kg
• Maximum load of bag is 2 kg
• Every bag or other load handing on the handle a ects its stability.
• Only the original parts, con rmed by the producer should be used in this product.
• Driving on the pavement or any other step the front axle should be lifted
• Do not drive the stroller through the stairs
• The stroller should be kept away from babies

PARTS LIST

1. CARSEAT 2. FRAME 3. SEAT 4. CARRYCOT 5. ADAPTORS SET x2 6. REAR WHEELS x2 7. FRONT WHEELS x2 8. BUMPER BAR 9. CANOPY
10. FOOTCOVER 11. MAMABAG
OPENING OF THE STROLLER:
2a. Lift the handle up as picture 2a
2b. When the stroller is opened as picture 2b, you should hear "click" sounds on both side of the stroller, please examine if the stroller is locked in safety position before you
use it.
ASSEMBLING/DISASSEMBLING OF THE REAR WHEELS:
3a. To assemble the rear wheels: Take one side of rear wheels, Insert the rear axle into the plastic hole as picture 3a, until it is locked, install the other side of the rear wheel
in the same way.
3b. To disassemble the rear wheels: Pull the rear wheel express iron as arrow 1, remove the rear wheel in the direction of arrow 2 then nish the disassemble
ASSEMBLING/DISASSEMBLING OF THE FRONT WHEELS ：
4a. To assemble the front wheels: Take one side of front wheels, insert the vertical shaft into the plastic hole on the wheel seat as picture 4a, until it is locked, install the
other side of the front wheel in the same way
4b. To disassemble the front wheels: press the small metal pins as arrow 1, at the same time use your hand to pull out the front wheel as arrow 2 to nish disassemble
5a. 360 DEGREE ROTATION OF THE FRONT WHEELS
Lift up the plastic button on the front wheels to lock it not rotated at 360 degree, press down the plastic button to release it can be rotated at 360degree as the arrow in the
picture 5a.
5b. BRAKING THE STROLLER
Step down the brake pedal to brake the stroller, lift up the pedal to release the brake as picture 5b
WARNING: Always lock the brake when put or carry a child
6. ASSEMBLING OF THE SEAT
Assemble the seat as picture 6 (back to mother), you should hear a "click" sounds on both side to make sure the seat is locked in safety position.
To reverse the seat in di erent direction (face to mother) in same way.
7a. ASSEMBLING OF THE BUMPER
Insert the bumper on both sides of the seat as picture 7a.
Note: please make sure to lock the bumper in place when you heard a "click" sound
7b. DISASSEMBLING OF THE BUMPER
Press the button as arrow 1 in picture 7b to remove the bumper.
8a. ASSEMBLING OF THE CANOPY
Insert the canopy plastic into the seat as picture 8a
ENGLISH