F5
F1
F2
F8
F7
F9
Alternate flashing of cooking
level set by user and of the
letter "C"
F3
F4
F6
Anomaly in the communication between
touch and power board - - all cooking
zones are deactivated an error is
visualised on all displays
Short circuit of temperature sensor of
heating elements - the only cooking zone
with the anomaly is deactivated - and
error is visualised on the relating display
Opening of ntc sensor- the only cooking
zone with the anomaly is deactivated -
and error is visualised on the relating
display
Anomaly on the NTC sensor - the only
cooking zone with the anomaly is
deactivated - and error is visualised on
the relating display
Anomaly on the NTC sensor - the only
cooking zone with the anomaly is
deactivated - and error is visualised on
the relating display
Over-current generator - all cooking
zones are deactivated an error is
visualised on all displays
Over-temperature of generator due to
intensive use or another use different
from domestic use
Short circuit of NTC sensor - all cooking
zones are deactivated an error is
visualised on all displays
Opening of NTC - all cooking zones are
deactivated an error is visualised on all
displays
Tension missing on a generator part
(right or left) - all cooking zones are
deactivated an error is visualised on all
displays
Contact authorized center for technical
assistance - specifying the error code
CONTACT AUTHORIZED CENTER
FOR TECHNICAL ASSISTANCE -
SPECIFYING THE ERROR CODE
CONTACT AUTHORIZED CENTER
FOR TECHNICAL ASSISTANCE -
SPECIFYING THE ERROR CODE
CONTACT AUTHORIZED CENTER
FOR TECHNICAL ASSISTANCE -
SPECIFYING THE ERROR CODE
CONTACT AUTHORIZED CENTER
FOR TECHNICAL ASSISTANCE -
SPECIFYING THE ERROR CODE
CONTACT AUTHORIZED CENTER
FOR TECHNICAL ASSISTANCE -
SPECIFYING THE ERROR CODE
IF HOLD OVER, CONTACT
AUTHORIZED CENTER FOR
TECHNICAL ASSISTANCE -
SPECIFYING THE ERROR CODE
CONTACT AUTHORIZED CENTER
FOR TECHNICAL ASSISTANCE -
SPECIFYING THE ERROR CODE
CONTACT AUTHORIZED CENTER
FOR TECHNICAL ASSISTANCE -
SPECIFYING THE ERROR CODE
CONTACT AUTHORIZED CENTER
FOR TECHNICAL ASSISTANCE -
SPECIFYING THE ERROR CODE
29