Descargar Imprimir esta página

AEG NT 1200 Instrucciones De Uso página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
Cable storage
Paper dust-sack
Inserting the
paper dust-sack
On-/off switch
Switching on
automatic control
(only applicable for
NT 1500 A)
Vacuuming dry
matter
Collecting up
liquids
ENGLISH
For storage, coil up the mains cable and
insert it between carrying handle and
motor section, as shown in illustration.
Use the paper dust-sack as well when sweeping up fine dust such as sawdust,
soot, ashes, etc.
1.
Open the snap–open grips and remove the
motor section.
2.
Take hold of the paper dust-sack by the
cardboard edges and press them firmly
against the vacuum hose connector.
3.
Fit the paper dust-sack against the wall of
the container.
4.
Fit the motor section such that the On/Off
switch is located above the aspiration hole
and snap shut the grips.
Switching on:
Switch the toggle switch to the "I" position.
Switching off:
Switch the toggle switch to the "0" position.
To switch on automatic control:
set switch to "A" and turn the On/Off switch
to "I" – the pilot light comes on. If a power
tool is connected to the plug, the vacuum
cleaner is switched on automatically
together with the power tool
To switch off automatic control:
set switch to "N" – the pilot light goes out.
Turn the On/Off switch to "0".
Take care when vacuuming dry matter that all parts are completely dry, particularly
the filter cartridge.
Additionally use the paper filter bag when vacuuming fine dusts like grinding dust,
soot, ashes, or similar.
Before starting to collect up liquids, clean the dust collection container and the filter
cartridge thoroughly of all dry residues, in order to avoid their getting unnecessarily
dirty.
Remove paper dust–bag, if inserted.
When the container is full, a floating valve closes the suction channel and thus
prevents the container from running over. When this happens, switch the machine off
and empty the container.
Should the machine fall over while vacuuming the floating valve closes the suction
channel. Put the machine up again and switch it off until the floating valve can be
heard opening. Switch the machine on again.
Always keep the floating valve clean and accessible.
4
NT 1200, NT 1500 A

Publicidad

loading

Este manual también es adecuado para:

Nt 1500 a