Basic Operation Flowcharts
Operations from a Computer
This section describes the operation flowchart for
using the projector via a network or for using the built-
in network function of the projector. There are two
types of flowcharts; for operations from a computer
and for those from the projector. For details, see the
pages in parenthesis.
Required conditions
• The projector and computer are connected to the
same LAN.
• The projector and computer are turned on.
• The INPUT-B FUNC. (VPL-PX15) or INPUT-C
FUNC. (VPL-FX50) is set to ON in the INSTALL
SETTING menu.
• The INPUT C/RS-232C/RS-422A select switch is set
to INPUT C. (VPL-FE110U/M)
• The input of the projector is set to INPUT B (VPL-
PX15) or INPUT C (VPL-FX50 and VPL-FE110U/M).
Operations from a Computer
Running a presentation using a file
created with PowerPoint
You can control a presentation using a file created with
PowerPoint from a computer.
Starting a Web browser of a computer to access the
projector
Start the Internet Explorer 4.0 or later versions, or
Netscape Navigator 4.5x or 4.7x version, and then enter
the projector's IP address.
Selecting PRESENTATION VIEWER
Select the PRESENTATION VIEWER icon in the
Application Select window.
Finding a file you want to use for your presentation
Select where the file is stored, the computer or projector,
then select the PowerPoint file you want. The Slide
Viewer starts.
Setting up a slide show
Set which slides to use and how to
advance a slide in a slide show.
Running a slide show
14
(GB)
Projecting an Excel file onto the projector
You can display an Excel file on the projector by
operating from a computer.
Starting a Web browser of a computer to access the
projector
Start the Internet Explorer 4.0 or later versions, or
Netscape Navigator 4.5x or 4.7x version, and then enter
the projector's IP address.
Selecting PRESENTATION VIEWER
Select the PRESENTATION VIEWER icon in the
Application Select window.
Finding a file you want to project on the projector
Select where the file is stored, the computer or projector,
then select the Excel file you want. The Worksheet
Viewer starts.
(page 19)
(page 20)
(page 20)
(page 21)
Projecting an Excel file
(page 19)
(page 23)
(page 23)