Olimpia splendid NEXYA S3 Manual De Usuario página 37

8) Fan speed selection button (FAN SPEED)
Select any one fan speed from "AUTO", "LOW"," MED" , and "HIGH". Each time push the button, the fan speed will
change in turn as fellow.
9) Adjustment button ▲:
Push the button, indoor temperature increases. Push the button continuously then the temperature increases by 1°C per
0.5 seconds.
10) Adjustment button ▼:
Push the button, indoor temperature decreases. Push the button continuously then the temperature decreases by 1°C per
0.5 seconds
11) Swing button:
Push this button for the first time when operation, it will start the swing function. Push the button for the second time,
cancel the swing function. (The function is available matched with the concerned unit)
12) Economical buttons:
Push the button to set the economical operation mode for air conditioner, push again then cancel the mode. The operation
mode is suitable for sleeping time.
13) Cool only/cooling and heating selection button (hidden):
Use a small stick with a diameter of 1mm to push the button to switch modes. For COOLING ONLY type, it will be no
heating mode when pressing MODE. The uniform mode is COOLING and HEATING at the factory.
14) LOCK button (hidden):
Use a small stick with the diameter of 1mm to push the LOCK button to lock the current setting, push the button again
then cancel the setting.
■ THE USING OF WIRE CONTROLLER
AUTOMATIC OPERATION
Insert the power supply, operation lamp of indoor unit flashes.
1. Push MODE to select AUTO
2. Set the desired temperature by pushing the button and, usually the temperature range is set from 1°C7 to 30°F.
3. Push ON/OFF, the operation lamp of indoor unit lights, the air conditioner start operating at the AUTO mode, the fan
speed is controlled automatically, wire controller display screen display AUTO the fan speed is un-adjustable. Push the
button ON/OFF again, then the air conditioner stops operating.
4. The ECONOMICAL button is available at the AUTO operation mode
THE OPERATION OF COOL/HEAT/FAN
1) Push the button MODE to select any one of "COOL", "DRY", "HEAT", or "FAN ONLY" mode
2) Select the desired temperature by pushing the button and, usually the temperature range is set from 17°C(62°F) to
30°C(88°F).
3) Push the button FAN SPEED to select any one of "AUTO", "LOW", "MIDDLE", or "HIGH" fan speed modes.
4) Push the button ON/OFF, the operation lamp on indoor unit lights, the air conditioner operates according to the mode
selected. Push the button ON/OFF again, stop the air conditioner.
Remark: It cannot set temperature at FAN mode, and only operate the step 1,3 and 4. The economical button is invalid at
FAN mode.
DEHUMIDIFY OPERATION
1 Press MODE to select DEHUMIDIFY mode.
2 Select the desired temperature by pressing the button.
3 Push the button ON/OFF, the operation lamp of indoor unit lights, and the air conditioner will start to dehumidifying.
Press the button ON/OFF again, stop the air conditioner.
37