Olimpia splendid NEXYA S3 Manual De Usuario página 49

IV. 4.7 Diagrammatic sketch for installing the main body
Installing the dust proof net and canvas air passage
1. Install the dust proof net according to the installation manual;
2. Install the canvas air passage underneath the dust proof net.
IV. 4.8 Duct Design
1. Air inlet and air outlet duct should be apart far enough to prevent air outlet entering Air Inlet.
2. There is dust filter on the indoor unit.
● Recommended duct connection.
efer to the following static pressure to install the air duct.
3. Please r
How to adjust the air ventilated direction? (From rear ventilated adjust it to descensional.)
1. Take off ventilation panel and flange, cut off the staples
at side rail.
Dentilation panel
3. When install the filter mesh, please plug it into flange
inclined from air return opening, and then push up.
Canvas tie-in
Air outlet
Isolation booth
Models
18
24
Air return flange
Side rail
Canvas tie-in
Isolation booth
Air inlet
Air dust filter
checking orifice
Static pressure (Pa)
70
70
2. Stick the attached seal sponge as per the indicating
place in the following fig, and then change the mounting
positions of air return panel and air return flange.
Seal sponge
4. The installation has finish, upon filter mesh which fixing
blocks have been insert to the flange positional holes.
Fig. 4-12
Fig. 4-10
Fig. 4-11
49