The Heat Setting; The Automatic Heat Up; Switching On And Off The Power Function - AEG HK954400FB Manual De Instrucciones

22
Operating instructions
• you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 sec-
onds. The sound operates until you remove the object.
• the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob again,
the cooking zone must be cool.
• you use incorrect cookware.
automatically.
• you do not stop a cooking zone or change the heat setting. After some time
on and the hob stops. See the table.
Automatic Switch Off times
Heat setting
Stops after

The heat setting

Touch the control bar at the heat setting.
Change to the left or the right, if it is necessary.
Do not release before you have a correct heat set-
ting. The display shows the heat setting.

The automatic heat up

Automatic heat up function sets the high-
est heat setting (not
and then decreases to the necessary level.
To start function touch the symbol
than set necessary heat setting.
on when the cooking zone operates on
highest heat setting.
To stop the function change heat setting.

Switching on and off the power function

The power function gives more power to an induction cooking zone for no longer than
10 minutes. After that time, the induction cooking zone automatically sets back to
To start it , touch
comes on and after 2 minutes the cooking zone stops
-
6 hours
) for some time,
and
comes
and comes on. To stop it, set a heat setting between
-
5 hours 4 hours
12
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14
- -
1.5 hours
and
comes
P
.
.