Getting Started; Receiving A Call; Making A Call - Fonexion ideus ITCAB400 Manual De Usuario

ITCAB400
2

GETTING STARTED

The unit requires 3×1.5V AAA batteries. Open the battery compartment cover and insert the
batteries in the right polarity, then close the cover (Proposal using alkali battery). There should
be time display on the liquid crystal screen after the batteries are inserted.
Insert one end of the line cord to the line jack of the base and the other end to the wall outlet
of exchanger.
Connect the handset and the unit with coiled line.
Setting the dialing mode to correct mode according to the directions from your local telecom.
Apply for the caller ID from your local telecom office.
3

RECEIVING A CALL

When a call comes, the telephone rings, the NEW LED flickers and La pantalla mostrará the seq.
number of the call, the date, time, incoming number and the NEW icon.
If the same number is received again, and the previous call has not been reviewed, the
La pantalla mostrará REPEAT icon.
If there is missed call has not been reviewed, the NEW LED will flash interval several
seconds in on-hook state.
When the incoming memory is full, the latest incoming number replaces the oldest
number in the memory.
In idle state, Pulse key or pick up handset, IN USE LED will be lighted.
Note: For the phone to display incoming number and other information, you must have an active
Caller ID subscription with your local telephone exchange company.
From handset
Pick up the handset and talk to the other party.
When finished, return the handset to the base.
Switching to speakerphone
When using the handset, Press the HANDSFREE key and return the handset to the base.
When finished, Press HANDSFREE key again.
From speakerphone
When the telephone rings, Press the HANDSFREE key and talk to the caller. For the other
party to hear your voice clearly, speak into the speaker from a distance of 32cm or less.
When finished, Press HANDSFREE key again.
Note: Generally telecom transmits the incoming message between the first ring and the second
ring. So please answer the phone after the second ring.

MAKING A CALL

From handset
Pick up the handset.
When you hear the dial tone, dial the desired number.
The unit will start to time the conversation after 6 seconds.
When finished, return the handset to the base.
From Speakerphone
Press HANDSFREE key
When you hear the dial tone, dial the desired number.
The unit will start to time the conversation after 6 seconds.
When finished, Pulse the HANDSFREE key again.
16
EN
USER GUIDE