One Touch Memory Operation; Two Touch Memory Operation - Fonexion ideus ITCAB400 Manual De Usuario

USER GUIDE

ONE TOUCH MEMORY OPERATION

Store the number in one-touch memory
Pre-dial the desired number or checking incoming and outgoing number that you want
to store.
Press MEMORY key
Press Mi (i=1 to 7) key
Make a call from one-touch memory
In off-hook or on-hook state, press Mi (i=1 to 7) key to dial the stored number out.
Or in on-hook state, press MEMORY key + Mi (i=1 to 7) key, LCD displays the stored
number, press HANDSFREE or REDIAL key or pick up the handset to dial it out directly, or
press REDIAL key twice to dial out number ahead with long distance code.

TWO TOUCH MEMORY OPERATION

Store the number in two-touch memory
Pre-dial the desired number or checking incoming and outgoing number that you want
to store.
Press MEMORY key
Press one of digit keys (0-9)
Make a call from two-touch memory
In on-hook state, press MEMORY key + digit key (0-9) key, LCD displays the stored
number, press HANDSFREE or REDIAL key or pick up the handset to dial it out directly, or
press REDIAL key twice to dial out number ahead with long distance code.
In off-hook state, press MEMORY key + digit key (0-9) key, the stored number will be
dialed out.
BABY CALL/BABY LOCK/OFF LINE FUNCTION
BABY CALL function
At on-hook state, press and hold REDIAL key for 3 seconds to come into baby call function
setting. LCD displays BABYCALL OFF(ON), press ▲ or ▼ key to set it ON or OFF, press SET
key to confirm. If you select ON, LCD displays NO CODE (or the preset baby call number, press
DEL key to cancel), input baby call number using numerical key and press SET key to confirm.
After set baby call function to ON state, pressing any key except REDIAL key or picking up
handset will dial out the baby call number automatically.
When baby call function is ON state, you can still answer the incoming call.
Note: If you don't use the function, enter baby call function setting as per above operation and
select BABYCALL OFF, press SET key to confirm.
BABY LOCK function
At on-hook state, press and hold REDIAL key for 3 seconds, LCD displays BABYCALL OFF(ON) ,
then press REDIAL key once to enter into BABY LOCK setting, and the LCD displays BABYLOCK
OFF(ON), press ▲ or ▼ key to set it ON or OFF, then press SET key to confirm.
After set baby lock function to ON state, pressing any number will invalid except emergency
numbers 110, 119, 120, and 999.
OFF LINE function
At on-hook state, press and hold REDIAL key for 3 seconds, LCD displays BABYCALL OFF(ON),
then press REDIAL key twice to enter into OFF LINE setting, and the LCD displays OFFLINE
OFF(ON), press ▲ or ▼ key to set it ON or OFF, then press SET key to confirm.
ITCAB400
21
EN