Adjusting Lcd Contrast; Setting Flash Time - Fonexion ideus ITCAB400 Manual De Usuario

ITCAB400
4 SETTING MENU
SETTING DATE & TIME
In on-hook state, press SET key, LCD displays SET 1 DATE and press SET key again, the value
for the year flashes.
Press ▲ or ▼ key to edit the year.
Press SET key to confirm and enter the next value month setting.
Repeat the above steps for month setting.
Repeat the above steps for date and time setting.
SETTING LOCAL AREA CODE
In on-hook state, press SET key and press ▼ key, LCD displays SET 2 CODE, press SET
key again, LCD displays CODE ------ and first "-" flashes.
Press ▲ or ▼key to edit the flashing code.
Press SET key to confirm and enter the next flashing code setting.
Repeat the above steps for the rest code setting.
SETTING LONG DISTANCE CODE
In on-hook state, press SET key and press ▲ key twice, LCD displays SET 3 LCODE, press SET
key again, LCD displays ---------------0 or preset codes, press DEL key to delete it.
Input the long distance codes using numerical keys, maximum 16 digits.
Press SET key to confirm and exit.

ADJUSTING LCD CONTRAST

In on-hook state, press SET key and press ▲ key three times, LCD displays SET 4 LCD,
press SET key again, LCD displays LCD 5
Press ▲ or ▼ key to adjust the LCD contrast, total 8 levels can be selected.
Press SET key to confirm and exit.
Shortcut key: At on-hook state, press FLASH key to enter LCD contrast setting directly, then
press FLASH key continuously to adjust the LCD contrast.

SETTING FLASH TIME

In on-hook state, press SET key and press ▲ key four times, LCD displays SET 5 FLASH,
press SET key again, LCD displays FLASH 100
Press ▲ or ▼ key to edit the Flash time to 100, 300, 600 and 1000ms.
Press SET key to confirm.
Note: press DEL key, or no operation within 16s, it will exit setting mode and return to the on
hook state.
SETTING THE PABX CODE
In on-hook state, press and hold DEL key 3 seconds to set PABX code, LCD displays
PCODE - and the "-" flashes.
Press ▲ or ▼ key to set PABX code from 0 to 9 or -.
If choose "-", it means no PABX code has been set.
Press SET key to confirm and quit.
18
EN
USER GUIDE