Sima SPIRAL-26 Manual De Instrucciones Original página 21

Overview
The SPIRAL-26 Spiral Bending Machine is designed and manufactured only for spiral bending
of round and rigid metallic bar materials. All other purposes of use are not allowed. This
machine can be operated with different optional apparatus for various shapes of bending. In
order to get the best output from your SPIRAL-26 locate it in such a position so as to be
operated easily, and to provide more efficient work from the Operator. Therefore, the site
where the machine will be operated is to be near the storage area of construction iron, and to
be covered with a shed, which would be more convenient. We recommend you to locate
workbenches in both sides of the machine. The length of each bench is to be the longest
length of the material to be bent. By means of support of these benches, the Operator will be
able to bend any kinds of material without lifting and turning over them, and thus the possibility
of more productive work may be obtained from the Operator.
Important Warning
 Prior to operate the machine read through this Operating & Maintenance Manual, carefully.
 Only the qualified personnel are allowed to operate the machine.

Disconnect the power prior to make checks, maintenance, lubrication, and/or adjustments.
 Observe all guidelines provided in this Operating & Maintenance Manual.
3