Sima SPIRAL-26 Manual De Instrucciones Original página 30

Weekly Maintenance
 Clean and grease the moving parts actuating the adjustment bracket.
Monthly Maintenance
 Check the bending pins and brackets. Replace the bent and/or cracked parts.
 Check if any leakage from the gearbox.
Biannual Maintenance
 Check and tighten all bolts and nuts of the machine.
Annual Maintenance
 Change the gearbox lubrication oil.
 Check and replace if any damaged or failure parts.
 Check and replace if any damaged or failure seals and ball bearings.
10. TROUBLESHOOTING
Refer to the Troubleshooting Chart below for the failures, errors and/or troubles, which may be
take place during utilization of the machine.
Warning! Disconnect first the power by turning the main switch to the (0) position in
case of a need to open the lid of power panel for troubleshooting. Do not allow the
people other than a qualified electrician to make a check and/or a repair in the power
panel.
12