Ec Declaration Of Conformity - Nice UST1-FU Manual De Instrucciones

Declaration in accordance with Directives: 2004/108/EC (EMC); 2006/42/EC (MD) annex II, part B
Note: The content of this declaration corresponds to the declaration at the last available version of the document fi led in the offices
of Nice S.p.A. prior to the printing of this manual. This text has been adapted to meet editorial requirements. A copy of the original
declaration may be requested from Nice S.p.a. (TV) I.
Declaration number:
Name of manufacturer:
Address:
Person authorized to provide
technical documentation:
Product type:
Model / Type :
Accessories:
The undersigned Luigi Paro, as Managing Director, hereby declares under his own responsibility that the product identified above
complies with the provisions of the following directives:
DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of December 15 2004 concerning alignment
of Member States' legislation regarding electromagnetic compatibility and abrogating directive 89/336/EEC, according to the
following harmonized standards: EN 61000-6-2:2005, EN 61000-6-4:2007
The product also complies with the following directive in accordance with the requirements for "quasi-machines":
Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of May 17 2006 regarding machines and amending
directive 95/16/EC (consolidated text), according to the following harmonized standards: EN 13849-1:2008
• I declare that the pertinent technical documentation has been prepared in accordance with Annex VII B to Directive 2006/42/EC and that
the following essential requirements have been met: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
• The manufacturer agrees to send the national authorities pertinent information on the "quasi-machine" in response to a motivated request
without affecting its intellectual property rights.
• If the "quasi-machine" is operated in a European country with an official language other than the language used in this declaration, the
importer must associate a translation with this declaration.
• The "quasi-machine" must not be operated until the final machine in which it is to be incorporated is declared to conform to the provisions
of Directive 2006/42/EC, if applicable to it.
The product also complies with the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008
EN 60335-2-103:2003
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003
Oderzo, November 4 2011
Some of our motors and control units
are tested by TÜV Nord

EC Declaration of conformity

and declaration of incorporation of "quasi-machine"
442/UST1-FU
NICE S.p.A.
Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy
Sig. Oscar Marchetto.
Control unit for electromechanical gear-motors
UST1-FU
Modules K3, K3A, K5, K7
Rev.: 0
Ing. Luigi Paro
(Managing Director)
Language: EN