25
Chapter 1
SAFETY GUIDANCE
z
1.1 Safety Operation Explaining
This unit is internally powered equipment, the degree of shock protection
is type B applied part
Type B applied part protection means that these patient connections will comply
Σ
IVD
with permitted leakage currents, dielectric strengths of IEC 60601-1.
1
To avoid any possible danger, please operate the device according to safety
guidance as following:
PHTHALATES
1.2 Warning
The infrared is harmful to the eyes, so the user and the maintenance man
should not stare at the light part of the SpO
For the special patients, there should be a more prudent inspecting
in the placing process. The SpO
and tender tissue.
Uncomfortable or painful feeling may appear if using the device ceaselessly,
especially for the microcirculation barrier patients. It is recommended that
the sensor should not be applied to the same finger for over 2 hours.
Please don't use this device when charging.
Explosive hazard - DO NOT use the device in environment with inflammable
gas such as some ignitable anesthetic.
Please don't use this device when MRI or CT scanning.
The person who is allergic to rubber can not use this device.
The user must use the oximeter probe which is provided by our company,
don't use the parts which are not manufactured by our company.
The device don't suit all user, if you can't get steady value, please stop
using it.
This device is not intended for treatment.
The device can not be transported mixed with toxic, harmful, corrosive
material.
.
30°C
2°C
86°F
35°F
probe can not be clipped on the edema
2
ENGLISH
probe (the infrared is invisible).
2