Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
22
Select and start a washing programme
Select and start a washing programme
1. Check that the baskets have been loaded correctly and that the spray arms are free to
rotate.
2. Check that the water tap is opened.
3. Press the ON/OFF button.
4. Select the washing programme. ( See "Washing programmes chart" ).
5. If required, postpone the start time of the washing programme.
6. Set, if required, the options.
7. Press the OK / START button and close the door, the washing programme will start
automatically.
If the delay start has been set, the countdown will start automatically. Once the delay
start has elapsed the programme will start automatically.
The opening of the door will interrupt the countdown. Close the door; the countdown
will continue from the point at which it was interrupted.
WARNING!
Interrupt or cancel a washing programme in progress ONLY if it's absolutely nec-
essary.
Attention! Hot steam may escape when the door is opened. Open the door carefully.
Cancel a delay start or a washing programme in progress
1. Open the dishwasher door.
2. Press simultaneously both OPTION and OK / START buttons.
3. The message CONFIRM CANCEL ? is displayed.
4. Press OK / START button to confirm.
5. The appliance returns to setting mode and the message CHOOSE PROGRAMME is
displayed.
• If a delay start is cancelled, also set the washing programme has been cancelled.
• If a new washing programme is set, check that there is detergent in the detergent dis-
penser.
Interrupt a washing programme in progress
• Open the dishwasher door; the programme will stop. The message PLEASE CLOSE
DOOR is displayed.
• Close the dishwasher door; the programme will continue from the point at which it was
interrupted.
End of the washing programme
• The dishwasher will automatically stop and an acoustic signal informs you of the end of
the washing programme.
Publicidad
Capítulos
Tabla de contenido
